9 Best Fujifilm X100VI Accessories of 2026: Ones That Fit and Hold

The 3+2 pack stands out from the slimmer screen-protector options in this lineup by giving you more glass and more do-overs: three sheets plus a cleaning kit in one budget-friendly bundle. Installation presses out bubbles with patience, and the included extras mean a misaligned first attempt is not wasted.

Touchscreen response stays intact after application, and the oleophobic coating stops fingerprints from building up. The matte finish also cuts glare in bright outdoor conditions, which helps when reviewing shots on the rear LCD. Display clarity remains close to the bare glass, so the protector will not get in the way during day-to-day shooting. Text stays sharp and colors keep their punch on the X100VI rear screen.

This set suits new X100VI owners who want LCD protection from day one without paying a premium for a single sheet. It is not the pick for anyone expecting a rigid frame-guided installation or premium-thickness, armor-like glass; edge lifting can appear after about a month of daily use if the camera is packed snugly. The two spare sheets offset that long-term risk, which makes this a sensible first accessory before a grip or case.

The dual-slot USB-C/Micro-USB charger and two decoded NP-W126 cells form the practical power kit for the X100VI. The charger tops both batteries in about 2.5 hours from a wall adapter, power bank, or car USB port, keeping the setup compact. Compared with the charging-case kit in this set, the K&F is the simpler option: no carrying case or SD storage, just a charger and two cells at a lower price.

X100VI shooters who want a spare cell for weekend travel or a casual day out get a practical addition to their kit. The Type-C input works with the phone charger or laptop they already carry. This kit is a travel companion rather than a non-stop professional setup — buyers who need OEM-equivalent endurance or cannot charge between sets will want a higher-capacity option.

The dual-slot design handles a standard two-battery rotation: charge one while using the other, then swap. The decoded cells report remaining power to the X100VI the same way the stock cell does, with no guesswork about charge state. Charging both cells at once cuts downtime to a single stop, which suits the camera's take-everywhere character.

The K&F Concept Black Diffusion 1/4 gives the X100VI a gentle film-like halation without forcing you to give up the original Fujifilm lens cap. The magnetic mounting system threads flush on the lens barrel, and the factory cap still fits over the front frame, so this filter can stay mounted between sessions.

In the image, the 1/4 black diffusion softens specular highlights and adds a modest bloom that reads as cinematic rather than foggy. AGC optical glass and a 28-layer nano coating keep the look clean, and the glass does not noticeably cut sharpness, which matters on a fixed-lens camera.

The frame construction matches the camera's understated metal body, and the mid-range price is reasonable for a filter that can live on the lens full-time. Unlike a square hood setup, this adds almost no frontal bulk and leaves the viewfinder line clear.

This filter belongs on a street or portrait X100VI where a permanent subtle glow is part of the shooting style. The effect is subtle and not adjustable: if you want heavy mist or dramatic glow, this specific 1/4 option will not deliver it. That makes it a fine-tuning tool for photographers who want halation present but not loud.

Top-layer genuine leather and an integrated hand grip give the X100VI a secure one-hand hold without bolting on a metal cage. The half-case is made for this camera only, so the fit is specific rather than generic. The bottom stays open for battery and card access, and the stitching follows the camera's body lines closely. The unboxing polish also suits someone looking for a premium gift for a Fujifilm photographer.

The case is shaped around the X100VI's controls, so the grip tucks into the right side and the leather wraps tight around the edges without blocking the shutter dial. The integrated grip sits deep enough to make one-hand carry feel planted rather than a fingertip squeeze. A 1/4-20 thread in the base keeps quick tripod plate mounting possible while the case stays on. The natural leather texture brings the retro look without adding much bulk.

This is the half-case for X100VI owners who want a grip and a vintage look in one accessory. The mounting screw can work loose over weeks of use, so owners should be comfortable with a periodic screw check.

Hard EVA shell with a soft anti-static lining slides into a backpack or purse without adding bulk. The case is shaped around the bare X100VI body: an elastic band holds the camera steady, the netting pouch handles a spare battery and SD card, and the double zipper opens wide enough for quick drops. It is a compact protective layer, not a bag for the full kit.

Travelers who keep the X100VI kit to a body, a spare battery, and an SD card will find the compact fit exactly right. The interior is snug and leaves little room for extras; a lens hood, charger, or half-case/grip combo needs a separate pouch. Seam wear can appear after a few weeks of regular zipping, so a periodic stitch check is worthwhile.

The double zipper runs smoothly, and the wrist strap makes grab-and-go easier than wrestling with a bag. The semi-waterproof shell handles light rain and the bumps of a commuter backpack. For a budget-friendly price, the build feels more substantial than a basic sleeve.

The SmallRig Retro Half Case brings genuine leather over an aviation aluminum frame to the X100VI, so the retro look and scratch protection arrive at a mid-range price. Fit is camera-specific: battery/card access stays open, controls remain usable, and the bottom tripod thread lets the case stay on during tripod work. A few units can ship without the bottom mounting screw, or that screw can work loose, so checking it before a shoot is part of owning the case. The MUZIRI half-case in this guide is the more refined option for handling-focused buyers, which is why SmallRig sits a tier lower.

The Haoge LH-X54B delivers the classic X100 square-hood silhouette while blocking stray light and adding a protective metal layer around the front element. The matte black finish, non-glare interior, and 49mm adapter ring keep the setup compact, filter-compatible, and visually restrained. It mounts via a threaded adapter and accepts filters up to 52mm in diameter. The mechanical fit — alignment, cap retention, and thread stress under impact — demands more hands-on care than the magnetic filter option, so the classic look is the reason to accept that fuss.

Zodelow's two 1600mAh cells give an X100VI longer runtime than the stock battery, and the hard-shell case keeps the dual-channel charger, spare cell, and two SD cards together in one kit. Full-speed charging requires a 9V/2.2A PD adapter; with a standard USB-C source the cells top off more slowly. That makes it a better fit for shooters who already carry a PD power bank than for anyone expecting a wall-wart solution, and it is a travel-oriented pick rather than a universal one.